Since 1997

Brian Rovinsky, Owner

(Formerly, St. Cecilia Sound Gallery)

1290 S. Missouri St., Suite C • Clearwater, FL 33756-9183

(727) 446-2505

Email: info@sweethomeaudio.com

CLICK HERE to return to Consignment List

 

 

Proceed HPA2 Stereo Amp 

 

Image result for proceed hpa 2

 

Proceed specialized in home theater components; however, their amplifiers were so highly regarded that they were often used in high end, two channel audio systems. Proceed components were considered to be one of the most cost effective lines of high end equipment ever produced, as one would have to spend about 40% to 50% more to find a (slightly) better performing component.

Their amplifiers share similar design features, circuitry and components with the Mark Levinson products that often cost over $10,000, so they can easily drive any speaker and make them sound their best. Each channel contains a dedicated, low impedance power supply. This 2-channel amplifier behaves as if it were two completely independent, high end mono amplifiers contained in one chassis.

In addition, this amp features dual-differential design to allow for true balanced operation, and accepts both RCA (single-ended) and XLR (Balanced) inputs. These features are very rare in a multi-channel amplifier, as most share a single power supply across all channels, and are not fully balanced.

 

Price is just $1150 (new it was $5000)

 

CLICK HERE to return to Consignment List

 

 

 

 

 

 

 

 

 

Related image

 

Proceed specialized in home theater components; however, their amplifiers were so highly regarded that they were often used in high end, two channel audio systems. Proceed components were considered to be one of the most cost effective lines of high end equipment ever produced, as one would have to spend about 40% to 50% more to find a (slightly) better performing component.

Their amplifiers share similar design features, circuitry and components with the Mark Levinson products that often cost over $10,000, so they can easily drive any speaker and make them sound their best. Each channel contains a dedicated, low impedance power supply. This 2-channel amplifier behaves as if it were two completely independent, high end mono amplifiers contained in one chassis.

In addition, this amp features dual-differential design to allow for true balanced operation, and accepts both RCA (single-ended) and XLR (Balanced) inputs. These features are very rare in a multi-channel amplifier, as most share a single power supply across all channels, and are not fully balanced.

SPECIFICATIONS Rated power output: 150 w/ch rms @ 8W, all channels driven, 20 Hz–20 kHz with no more than 0.1% THD 250 w/ch into 4W

Frequency response: within 0.1 dB from 20 Hz to 20 kHz Signal to Noise ratio: main outputs - better than –80 dB (ref. 1 w)

Input impedance: 30 k ohms (balanced) 100 kohms (single-ended) Voltage gain: 23 dB (balanced) 29 dB (single-ended) Input sensitivity: 2.4 V for full rated output (balanced) 1.2 V for full rated output (single-ended).
 

 

Price is just $1150 (new it was $5000)

 

CLICK HERE to return to Consignment List